Installing the Mobile Controller : Completing the configuration checklist
  
Completing the configuration checklist
The following checklist contains the parameters you specify to complete the initial configuration of the Mobile Controller.
Verify system requirements before you begin. For details, see Software and configuration requirements.
Be prepared to provide values for the parameters listed in the following checklist.
Component
Parameter
Your value
Mobile Controller
Host Name
 
IP Address
 
Netmask
 
Default Gateway (the WAN gateway)
 
Primary DNS Server (Domain Name Server IP address)
 
Domain Name
 
Administrator Password
 
SteelHead Mobile client
Data Store Size - A minimum size of 256 MB is required for the data store. For PCs, the default value is 10 GB.
 
Maximum Log Size - The default value is 5000 KB.
 
Maximum Number of Log Files - The default value is 2.
 
VPN Port Number - Enter a port number if you’re adding a pass-through rule.
 
Values for Data Store Size, Maximum Log Size, and Maximum Number of Log Files are needed only if you don’t use the default package that ships with the Mobile Controller.
Memory usage
Ensure that there is enough memory on your client computers to run the SteelHead Mobile software. This table provides an example of memory usage per data store size. Your memory usage might vary.
Data store size
Memory usage
256 MB
81 MB
512 MB
81 MB
1 GB
81 MB
2 GB
100 MB
5 GB
112 MB
10 GB
161 MB
15 GB
171 MB
20 GB
228 MB